• Does Ddr2 Ram Work In Ddr3 Slot
• Can We Use Ddr2 Ram In Ddr3 Slot

DDR2 is a double data rate RAM interface which superseded the original DDR SDRAM specifications and is also superseded by the DDR3. As mentioned before, in regards to the memory settings both the DDR2 and DDR3 memory were set to AMD's maximum supported speeds of 1066MHz and 1333MHz respectively. 2-Can i cross between DDR3 and DDR2 memory in the two slots, or do i have to keep the same type in each? - (and also, whats the difference between the two) Thank You. JMMD Posts: 840 +7.

How to identify computer ram ddr1 ddr2 ddr3, DDR4 Identifying the Computer RAM (Random Access Memory) like DDR1, DDR2, DDR3, and DDR4 physically is not so hard if you follow the steps.

1. Distance of Notch
2. Integrated Chip (IC) type

Does Ddr2 Ram Work In Ddr3 Slot

DDR1, DDR2, DDR3, DDR4 is the most using RAM currently in the market.

First of all confirm is it DDR1, DDR2, DDR3, or Different DDR’s SDRAM. keep your DDR chip front-facing as given bellow. here look to the notch each DDR notch distance is different from others DDR. It’s mentioned in the picture.

Also Read :

Distance of Notch

• • Notch Means above cuts Mark on RAM
    • DDR1, DDR2, DDR3 having Single Cut mark on the base of the RAM
  • But you can see the Cut mark (Notch) distance (see below photo)
    • Notch of DDR1 and DDR2 are similar but if you see closely,
      • You can find DDR1 Notch is just above the IC and DDR
      • DDR2 Notch is just far to the IC
    • Notch of DDR3 is different from the other two.

Can We Use Ddr2 Ram In Ddr3 Slot

• Integrated Chip (IC)

  • See the Above Photo
    • DDR3 having small and square type IC.
    • DDR2 is just bigger then DDR3 and smaller the DDR1,
    • In this case, too, DDR1 and DDR2 are just a small difference
      • IC in DDR1 are touched both top and bottom of RAM
      • and IC in DDR2 is just center of the RAM

• Number of Pins in DDR1, DDR2, DDR3, DDR4

  • DDR1 – 184 Pins
    • DDR2 – 240 Pins
      • DDR3 – 240 Pins
        • DDR4 – 288 Pins

• Voltage of RAM

  • The voltage of RAM cannot be used for the Physical finding of RAM, but it can be used to place the RAM in the Motherboard Slot. (voltage are written in the RAM Slot of Motherboard)
    • DDR1 Volts – 2.5 v
      • DDR 2 Volts – 1.8 v
        • DDR3 Volts – 1.5 v
          • DDR4 Volts – 1.2v

• Click to Buy Best DDR RAMs for Desktops

• Click to Buy Best DDR RAMs for Desktops

identify computer ram ddr1 ddr2 ddr3